24
VQT3W38
1 Change the mode to .
2 Open the LCD monitor.
3 Press the recording start/stop
button to start recording.
A When you begin recording, ; changes to ¥.
B Recording button icon
≥ Recording can also be started/stopped by touching the recording button icon. This icon
functions in the same manner as the recording start/stop button.
4 Press the recording start/stop button again to pause recording.
∫ Screen indications in the Motion Picture Recording Mode
≥ Screen display will disappear when no touch operation is performed for a specific period of
time. To display it again, touch the screen. (l 35)
≥ It will be constantly displayed when the remaining recordable time becomes less than
30 minutes.
≥ To change the recording format, change the Recording Mode (l 56) or press and
hold the 1080/50p button. (l 45)
≥ Still pictures can be recorded while recording the motion picture. (l 28)
≥ The images recorded between pressing the recording start/stop button to start recording
and pressing it again to pause recording become one scene.
Basic
Recording motion pictures
Recording mode
R1h20m
Approximate remaining recordable
time
≥ When the remaining time is less
than 1 minute, R 0h00m flashes
red.
0h00m00s
Recording time elapsed
≥ “h” is an abbreviation for hour, “m”
for minute and “s” for second.
≥ Each time the unit is put into
recording pause, the counter
display will be reset to 0h00m00s.
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
HC-V500&V500M-EB-VQT3W38_mst.book 24 ページ ２０１２年１月１３日 金曜日 午後９時４分
To Next Page
Loading...
