98
VQT3W38
You can connect this unit to 3D compatible TV, convert the scene/still picture recorded in 2D
(conventional image) to 3D and play back.
¬ Change the mode to and touch the play mode select icon. Then, select the
AVCHD scene, or set to
. (l 31)
Setting with the Touch Menu
1 Touch .
≥ This is not displayed when playing back the iFrame or
scenes saved as MP4.
2 Play back the scene or the still picture by
touching it.
≥ Highlight Playback cannot be converted to 3D image.
≥ Scenes/still pictures converted to 3D images cannot be saved as 3D images.
∫ Adjusting 3D effect of the 3D image
It is possible to adjust the disparity of the scenes and still pictures playing back in 3D for better view.
1 Play back the scenes or still pictures in 3D.
2 Touch .
≥ Playback disparity adjustment bar is displayed while
displaying in 3D.
3 Touch / to adjust settings.
≥
Playback disparity adjustment bar will disappear after approx. 5 seconds without any touch operation.
≥ The setting is cancelled in following cases:
jIf you stop playback
jIf you turn the unit off
jIf you change the mode
Advanced (Playback)
Converting and playing back 2D
images as 3D
: [VIDEO SETUP] or [PHOTO SETUP] # [CONV. 2D TO 3D] # [ON]
[ON]: Convert and play back the images recorded in 2D as 3D images.
[OFF]: Recorded images are played back as it was recorded.
≥ Stop the operation when you feel fatigue, discomfort, or otherwise strange while
playing back or adjusting.
HC-V500&V500M-EB-VQT3W38_mst.book 98 ページ ２０１２年１月１３日 金曜日 午後９時４分
To Next Page
Loading...
