44
VQT3W38
Use the image stabilizer to reduce the effects of shake during recording.
This unit is equipped with Hybrid Optical Image Stabilizer.
Hybrid Optical Image Stabilizer is a hybrid of optical and electrical image stabilizer.
∫ Changing Image Stabilizer Mode
(Motion Picture Recording Mode)
When set to [ON], you can further improve image stabilization for recording while walking, or
holding the unit and recording a distant subject with zoom.
≥ This function’s default setting is [ON].
(Still Picture Recording Mode)
≥ Please refer to page 48 for details about the Optical Image Stabilizer Lock.
Advanced (Recording)
Image Stabilizer Function
: [RECORD SETUP] # [HYBRID O.I.S.] # [ON] or [OFF]
: [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2]
[MODE1]: The function works all the time.
[MODE2]: The function works when the button is pressed. We
recommend using this mode when you are recording yourself or
recording with a tripod in Still Picture Recording Mode.
Optical image stabilizer button
Press the button to turn optical image stabilizer
on/off.
(Motion Picture Recording Mode)
/ # (setting cancelled)
≥ When [HYBRID O.I.S.] is [ON], is
displayed. When [OFF], is displayed.
≥ When recording with a tripod in Motion Picture
Recording Mode, we recommend that you set the
image stabilizer off.
(Still Picture Recording Mode)
/ # (setting cancelled)
≥ When [O.I.S.] is [MODE1], is displayed.
When [O.I.S.] is [MODE2], is displayed.
HC-V500&V500M-EB-VQT3W38_mst.book 44 ページ ２０１２年１月１３日 金曜日 午後９時４分
To Next Page
Loading...
