90
VQT3W38
You can combine the relayed scene (l 57) in the built-in memory and the continued
scene in the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay Recording
≥ Change the mode to and touch the play mode select icon. Then, select the
AVCHD scene. (l 31)
1 Insert the SD card that was used for Relay Recording.
2 Select the menu.
3 When the confirmation message appears, touch [YES].
≥ Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are
not deleted.)
4 Touch [EXIT] when the relay scene combining complete message is
displayed.
≥ The thumbnail view of the SD card is indicated.
≥ Relay Recording information will be deleted when the relay scenes are combined, and
Relay Recording will be possible again.
≥ When the relayed scenes in the built-in memory or SD card are deleted, combining of the
relayed scenes will not be possible.
Advanced (Playback)
Relay scene combining [HC-V500M]
Relay-recorded scene Relay scene combining
: [EDIT SCENE] # [RELAY SCENE COMBINE]
HC-V500&V500M-EB-VQT3W38_mst.book 90 ページ ２０１２年１月１３日 金曜日 午後９時４分
To Next Page
Loading...
