Panasonic HC-V500M - Manual Focus Adjustment

71
VQT3W38
Manual Focus adjustment
If auto focusing is difficult due to the conditions, then use Manual Focus.
≥ Press the iA/MANUAL button to switch to Manual Mode. (l 68)
1 (When MF assist function is used)
Select the menu.
≥ Touch to display the Manual icon.
2 Touch [FOCUS].
3 Touch [MF] to change to Manual Focus.
≥ MF appears on the screen.
4 Adjust the focus by touching / .
The in-focus area is displayed in blue. The normal
screen returns approximately 2 seconds after you finish
bringing the subject into focus.
≥ Touch [FOCUS] to end the adjustment.
≥ When [MF ASSIST] is [OFF], the blue area is not displayed.
≥ To restore Auto Focus, touch [AF] in Step 3 or press the iA/MANUAL button again.
≥ The blue display does not appear on the images actually recorded.
: [RECORD SETUP] # [MF ASSIST] # [ON]
: To focus on a close subject
: To focus on a faraway subject
MENU
MNL
MFMF
MF
FOCUS
WB
SHTR
IRIS
A Part displayed in blue
MF
MF
MF
MF
HC-V500&V500M-EB-VQT3W38_mst.book 71 ページ ２０１２年１月１３日 金曜日 午後９時４分