94
VQT3W38
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
Example of images with a [16:9] aspect
ratio on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
* This setting is only available in recording
mode.
: [SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
: [SETUP] # [EXT. DISPLAY] #
desired setting
[SIMPLE]*: Information partially
displayed
[DETAIL]: All information displayed
[OFF]: Not displayed
Refer to the following support site for information about the Panasonic TVs that you
can directly insert an SD card into the SD card slot on the TV and then play it back.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the recording mode.
≥ For details on how to play back, please read the operating instructions for the TV.
HC-V500&V500M-EB-VQT3W38_mst.book 94 ページ ２０１２年１月１３日 金曜日 午後９時４分
To Next Page
Loading...
