- 121 -
Dividing a scene to partially delete (4K MP4/MP4/
iFrame)
series/ series
Divide the 4K MP4 scenes or MP4/iFrame scenes, and delete unnecessary parts.
series/
Divide the MP4/iFrame scenes, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes deleted by dividing cannot be restored.
≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the 4K MP4 scenes
*
or MP4/iFrame scene. (l 29)
* series/ series only
1 Select the menu.
2 Touch and play back the scene you want to divide.
≥ It is convenient to use Slow-motion Playback and Frame-by-frame Playback. (l 95, 96)
3 Touch to set the dividing point.
≥ Set the dividing point so there will be 2 seconds or more for the
part for deletion, and 3 seconds or more for the part to be kept.
4 Touch the part for deletion.
5 Touch [YES] and confirm (play back) the part for
deletion.
≥ A confirmation message appears when [NO] is touched. Proceed to Step 7.
6 Stop the playback.
≥ A confirmation message appears.
7 Touch [YES].
≥ To continue dividing and deleting other scenes, repeat Steps 2-7.
To complete editing
Touch [Return].
≥ It may not be possible to divide scenes with a short recording time.
≥ The actual division may slightly slip off the previously designated dividing point.
: [EDIT SCENE] # [SPLIT&DELETE]
V760
MENU
0h01m30s
0h01m30s
To Next Page
Loading...
Need help?
General