- 240 -
When disposing of or giving away the SD
card, note that:
≥ Formatting and deletion of data on this unit or
computer only changes the file management
information and does not completely delete
the data in the SD card.
≥ It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
///
To physically format the SD card, connect the
unit via the AC adaptor, select [SETUP] #
[FORMAT MEDIA] # [YES] from the menu,
and then press and hold the recording start/
stop button on the screen below for about
3 seconds. When the SD card data deletion
screen appears, select [YES], and then follow
the on-screen instructions.
//
To physically format the SD card, connect the
unit via the AC adaptor, select [SETUP]
#[FORMAT MEDIA] # [SD CARD] from the
menu, and then press and hold the recording
start/stop button on the screen below for
about 3 seconds. When the SD card data
deletion screen appears, select [YES], and
then follow the on-screen instructions.
≥ The customer is responsible for the
management of the data in the SD card.
≥ When the LCD screen is dirty or
condensation has occurred, please wipe it
using a soft cloth such as eyeglass cleaner.
≥ Do not touch the LCD monitor with your
fingernails, or rub or press with strong force.
≥ It may become hard to see or hard to
recognise the touch when the LCD protection
sheet is affixed.
≥ When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than usual
immediately after the unit is turned on. The
normal brightness will be restored when the
unit’s internal temperature rises.
About the SD card
WX970M
LCD monitor
Extremely high precision technology is
employed to produce the LCD Monitor
screen. The result is more than 99.99%
effective dots with a mere 0.01% of the dots
inactive or always lit. However, this is not a
malfunction and does not affect the recorded
picture.
To Next Page
Loading...
Need help?
General