- 144 -
∫ To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥ //
To copy scenes or still pictures from the built-in memory to an
SD card, see page 134.
∫ To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Turn o n the uni t.
A USB cable (supplied)
B Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB
terminal of this unit.
≥ Insert the plugs as far as they will go.
1 Connect the unit to the Blu-ray disc recorder or high-definition (AVCHD)
compatible DVD recorder.
≥ The USB function selection screen will appear on the screen of the unit.
2 Touch [RECORDER] on the screen of this unit.
≥ When you select an option other than [RECORDER], reconnect the USB cable.
≥ ///
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
3 //
Touch the media you wish to dub.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
Dubbing in high-definition picture quality
WX970M
To Next Page
Loading...
Need help?
General