- 25 -
1 Open the LCD monitor, and set this
unit to Motion Picture Recording
Mode. (
l 18)
2 Press the recording start/stop button
to start recording.
A Recording button icon
B When you begin recording, ; changes to ¥.
3 Press the recording start/stop button
again to pause recording.
≥ Recording can also be started/stopped by touching the recording button icon.
∫ Screen indications in the Motion Picture Recording Mode
≥ Screen display will disappear when no touch operation is performed for a specific period of time.
To display it again, touch the screen. (l 33)
≥ It will be constantly displayed when the remaining recordable time becomes less than 30 minutes.
Basic
Recording motion pictures
Recording mode
R 1h20m
Approximate remaining recordable time
≥ When the remaining time is less than
1 minute, R 0h00m flashes red.
0h00m00s
Recording time elapsed
≥ “h” is an abbreviation for hour, “m” for
minute and “s” for second.
≥ Each time the unit is put into recording
pause, the counter display will be
reset to 0h00m00s.
T
W
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
To Next Page
Loading...
Need help?
General