Panasonic KAIROS - Page 107

107
Note:
When start modifying a Transition Duration frame rate, the displayed button turns into an
button to confirm the new entered frame rate, (allowing multiple duration changes and try-outs),
before closing the dialog with the final , or cancel dialog.
See more details regarding the numeric keypad in section “4.6 Numeric Keypad Section “Menu”:”
starting on page 112.
Picture 4.4.4
Picture 4.4.6
When pressing the “T-Dur” button next to one of the
Lever/Fader arm locations in order to enter a Transition
Duration rate (in Frames), the “Numeric Keypad”
section of the lower Control Panel Deck
-
1 will be
delegated.
Or use the lower Digipot next to the N
umeric
Keypad of Deck
-1 to enter value.
= Confirm & close dialog
= Backspace for entry corrections
= 1. press confirmation; 2. press closing dialog
Picture 4.4.5
Picture 4.4.7
Press & hold one of the “Next Transition” selection
buttons (1
–8) in Transition section of Deck-1 or Deck
-
2, in order to enter a Transition Duration rate (in
Frames), and the “Numeric Keypad” section of the
lower Control Panel Deck
-1 will be delegated. Or
use
the lower Digipot next to the Numeric Keypad of Deck-
1 to enter value.
The Displays are showing the actual Layer
-
Name with
actual Transition Duration rate.
Note: Selecting multiple “Next Transition” buttons 1–8 will also affect the LAH-Scene Preview output,
displayed on Multiviewer or Aux-Output. LAH = Look Ahead Preview.