Panasonic KAIROS - Page 108

108
In order to modify/edit the available Transition
types (Picture 4.4.2) used for temporary
overwrite by default, left mouse-
click the
function “Transition type overwrite” on a
selected
“Profile” & “Deck” in Kairos Creator
GUI in Mixer > Panel tab menu, located top
right under “Parameter View.”
Picture 4.4.8
Picture 4.4.10
When opening the “Transition type overwrite”
dialog, a default of 8 different Transition types
is listed. The
list can contain more entries, but
only the first 8 will be displayed in according
Transition display. Please see Picture 4.4.9 for
more operational instructions.
Picture 4.4.9
Note: This selection of all available
transitions has been graphically
composited and is not available as an
actual GUI menu. However, all
Transition types are available for
“In/Out Effects” as well as “A/B Effects.”
The selected “Category” for “User” at
the bottom of “Picture 4.4.10” is User
-
definable and can be renamed. So,
more effects can be created and added
to the list or unwanted effects can be
removed.
Changing the order
of appearance for a
selected Transition.
Delete a selected
Transition from the
list.
Open dialog to add
new Transition into
list (Picture 4.4.6).