Panasonic KAIROS - Page 115

115
Picture 4.6.9
Picture 4.6.10
= Joystick Calibration dialog
Follow instructions displayed in upper Transition section.
“1.
Rotate Z axis in Clockwise and Counterclockwise direction to Max Limits.”
“2.
Rotate Joystick Clockwise and Counterclockwise in a full circle 2–3 times to be sure.”
Press “OK” to confirm or “Cancel” to abort.
= Brightness control
Brightness adjustment (button backlight intensity)
Use Numeric Keypad or lower Digipot to enter the value.
Use the “Backspace” button as needed.
Use the “Cancel” button to abort the dialog.
Use the button to confirm and close the entry.