Panasonic KAIROS - Page 116

116
Picture 4.6.11
Picture 4.6.12
= Profile selection Control Panel 1–8
Use button 1–
8 in order to recall the designated Panel
Profile (see section 4.3 “New Layout” wizard).
Use the “Cancel” button to abort the dialog.
Use the button to confirm and close the entry.
Note:
If Profile setting is changed in the Kairos Creator,
please reselect Profile-# on the Control Panel.
= Info regarding Software Version
Information regarding installed software version. This is a
read-only information.
Use the “Cancel” button to abort the dialog.
= High/Low LED button Contrast
Use the buttons “High,” “Mid,” or “Low” in order to select the
preferred contrast setting.
When selecting “Sapphire” mode, the Kairos Control Panel
will disable all button colors, except “Tally On-Air” indication,
and turns selection buttons into “Sapphire” (blue) color tone.
Use the “Cancel” button to abort the dialog.
Use the button to confirm and close the entry.