31
The “Scenes” panel, in the upper left, contains a hierarchical tree
of the Scenes available in the current running production. The
cursor focus in this example is on the Scene called “Main,” which
in this case (derived from loading a Default Production) is being
used as Main-Program output, showing “On-Air” tally in
“Parameter View.” A right mouse-click on one of the items in the
tree will open a context menu with options to change the order of
the objects, access clipboard functionality, Rename or Delete the
object.
The “Layers” panel displays the current status of Scene: “Main.”
Layer names & priority plus individual color per Bus.
Selected source per Bus.
On/Off state per Bus.
Cursor focus is on the Background A/B bus (gray background).
A right mouse-click on one of the layers
will open a context menu with options to
open the “Select Source” dialog, enable
or disable layer effects, change the order
of the objects, access clipboard
functionality, Rename or Delete the
object. The according keyboard
shortcuts are listed to the right.
Due to the cursor selection in “Layers” window, the
“Parameter View” window is only showing the relevant
Scene settings. All settings here can be changed on a
Scene-by-Scene basis. Resolution (1280×720;
1920×1080; 3840×2160), Scene Color and Tally
indication. The Background Bus color is set to Red and
is displayed in the “Layers” window at the bottom
(Picture 3.3.3.2.8). Since “Background A/B” is selected
in “Layers” window and the fact that there is no other
Layer activated/visible (Picture 3.3.3.2.8), the working
area (Picture 3.3.3.2.6 on top of this page) also shows
a full red screen.
When option “AT-SF003 (Canvas)” is installed, the
“Advanced resolution control” can be activated for
independent X/Y-Resolution adjustments. Maximum
resolution is at 8K (e.g. X=15360, y=2160).
The “Advanced” setting also allows to Auto-execute a
selected Macro when this Scene gets the “On-Air” tally.
To Next Page
Loading...
