32
Since the “Layers” panel in this example has the cursor selection on “Background,” there are also
additional controls available in “Layer Settings” under “Parameter View.” A default selection of effects
is available per Layer, including Crop, Transform2D, CornerPinning, LuminanceKey & ChromaKey.
Additional effects can be added using the button in the lower right corner (see page 34).
• Program/Preset bus rows indicated in Red according to the “Layer Settings”-Color.
The “Advanced Layer Settings” unfolded in the “Parameter View”
panel present additional Layer controls for Opacity, Source link,
PGM/PST mode (see bottom of Page 7, section “1.2.3 Layer” in
this manual), Mode = Size default settings per Layer (related to
the “Scene Settings” X/Y Resolution), Preset Enabled (or B-Bus),
Clean mask (to enable/disable a Layer from a designated Output),
Dissolve enable per Layer (also available for Aux-Buses/Outputs
and described on Page 7 in this Manual section “1.2.3 Layer”),
adjustment for Dissolve time (duration), selection for Dissolve
effect type (Mix, Wipe, DVE, User), selection for Dissolve mode
(Normal, Reverse, Cross).
To Next Page
Loading...
