Item Contents
AutoIP
Enable (On) or disable (Off) Auto IP. If DHCP is disabled, this setting cannot
be changed. This setting can also be changed from Network Setting Tool
(page 103).
IP Address
Set the IP address. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 103).
Subnet Mask
Set the subnet mask. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 103).
Default Gateway
Set the default gateway. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 103).
DNS Server 1 Set the primary DNS server.
DNS Server 2 Set the secondary DNS server.
WINS Server 1 Set the primary WINS server.
WINS Server 2 Set the secondary WINS server.
HTTPd
Enable (On) or disable (Off) the HTTPd.
If HTTPd is disabled, "Configuration Web" is not available.
Host Name
*1
Set the host name for the scanner (up to 15 characters).
MAC Address Display the scanner's MAC Address.
*1
For details, refer to "8.2.1 Available characters in Configuration Web" (page 68).
Maintenance
Setting contents
Item Contents
Cleaning Mode Start Cleaning Mode. For details, see "10.2.4 Cleaning Mode" (page 91).
5.3 Menu screen
30
To Next Page
Loading...
