Why does my Panasonic KV-S1058Y Scanner frequently have paper jams?
Frequent paper jams can occur because: * The document is wrinkled: Smooth out the document. * The rollers are dirty: Clean the rollers. * The document is not aligned correctly: Realign the document. * Too many sheets are set on the feed tray: Remove sheets until the sheets on the feed tray are under the limit mark on the document guide.
What to do if my Panasonic Scanner is not recognized by the computer?
If the computer does not recognize the scanner, consider the following: * The scanner is not connected to the computer correctly: Connect the USB cable or LAN cable correctly. * The software is not installed correctly: Uninstall the software from the computer, and then install the software again. * The scanner is connected via USB hub: Do not connect via USB hub. * There is a problem with the cable: If you are using a USB cable, be sure to use the included USB cable. If you are using a LAN cable, use a category 5 or enhanced category 5 cable or greater. * The network-related settings are incorrect: Check the network-related settings. * The unit’s power was turned off because no operations were performed for a certain period of time: Turn on the unit's power.
Why is my Panasonic KV-S1058Y scan speed so slow?
If your scan speed is slow, it might be due to: * The scanner is connected over a USB 1.1 connection. Connect over USB 2.0, USB 3.0 or USB 3.1. * When using a LAN connection, the scanning speed may be slower due to network traffic. Consult your network administrator.
What to do if the LED (Green) does not light when the Panasonic Scanner’s power is turned ON?
If the green LED doesn't light up when you turn on your Panasonic Scanner, the power cord might not be plugged in properly. Ensure the power plug is firmly inserted.
Why is my Panasonic KV-S1058Y Scanner not recognized by the computer?
There are several reasons why your Panasonic Scanner might not be recognized: - The USB cable may not be correctly connected. Ensure it is properly connected. - The software may not be installed correctly. Try uninstalling and reinstalling the software. - The scanner may be connected via a USB hub. Avoid connecting it through a USB hub. - There might be a problem with the USB cable. Use the USB cable that came with the scanner. - The scanner might have turned off due to inactivity. Press the power button to turn it back on.
How to fix a Panasonic Scanner that won't start scanning?
If your Panasonic Scanner doesn't start scanning even with a document loaded, it could be due to these reasons: - The document may not be loaded correctly. Make sure to load it properly. - The scanner's sensor might not be detecting the document because the edge is curled. Flatten the document before loading it again.
General| Type | Document Scanner |
|---|---|
| Optical Resolution | 600 dpi |
| Maximum Paper Size | A4 |
| Weight | 3.6 kg |
| Interface | USB 3.0 |
| Image Sensor | CIS |
| Light Source | LED |
| Scanning Modes | Color, Grayscale, Black & White |
| Maximum Document Size | A4 |
| Scanning Technology | CIS (Contact Image Sensor) |
| Duty Cycle | 4000 sheets per day |
| Supported OS | Windows |
| Scanning Method | Duplex |
| Power Consumption | 18 W |
| Scanning Speed (A4, Color, 300 dpi) | 30 ppm |
| Scanning Speed | 30 ppm |
| Scanning Speed (Color, A4, 200dpi) | 30 ppm |
To Next Page
