Panasonic KW8M - Page 2

【KW8M (AKW8111)】
Basic setting to measure by Eco-POWER METER
When wiring the main unit and the current transformer (CT) and setting the basic setting after power on,
you can measure the power
The basic setting of MODE1 is necessary to measure.
In order to use the other functions, the settings of the each parameter are necessary.
Check alarm
output
Check measured
data via
communication
device
What to do
Measure Power
Mount / Connection
Settings
Count pulse
output from
other device
Output Alarm
Wire the main unit
Connect the current transformer (CT)
Wire output
line
Collect data
via RS485
Wire
communication
line
Wire input
line
Power on the main unit
Set the parameter for
pulse measurement
Check measured
data with power
monitoring mode
Set alarm
output
(MODE1)
Check count value
with power
monitoring mode
Set
communication
setting
(MODE3)
Set the basic settings (MODE1)
p.15
p.22
p.15
p.23
How to use
6.2
6.2
5.3
7
Measure
ON-time and
OFF-time
Check measured
time with power
monitoring mode
6.2
3
3
3
3
3