Panasonic KX-FLB802CX

98
KX-FLB802CX/KX-FLB812CX/KX-FLB802CXS/KX-FLB812CXS
593 Time between CED and 300bps 1:75 msec
2:500 msec
3:1 sec
1~3 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.155). Refer to
(P.148) and (P.155).
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2st time
1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.155). Refer to
(P.147) and (P.155).
595 Receive error limit value set 1: 5%
2: 10%
3: 15%
4: 20%
1~4 2 If the number of errors during transmission exceeds
this value, the sending side terminates the call.
596 Transmit level set X dBm - 15~00 10
Selects the FAX transmission level. Refer to (P.147)
and (P.148).
598 Receiving sensitivity 43= -43 dBm 20~48 43 Used when there is an error problem. Refer to
(P.155).
599 ECM frame size 1:256 2:64 1, 2 1 ----------
639 LSU test
See (P.92).
655 Cause Distinction Code of Call Service 3
See (P.120).
677 FAN test
See (P.92).
710 Memory clear except History data Refer to Memory Clear Specification (P.99).
717 Transmit speed select 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6 1 Adjusts the speed to start training during FAX trans-
mission. Refer to
(P.147) and
718 Receive speed select 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6 1 Adjusts the speed to start training during FAX
reception. Refer to
(P.148) and
721 Pause tone detect 1:ON 2:OFF 1, 2 2 Selects the tone detection for pause in dialing.
722 Redial tone detect 1:ON 2:OFF 1, 2 1 Sets the tone detection mode after redialing.
763 CNG detect time for friendly reception 1:10 sec
2:20 sec
3:30 sec
1~3 3 Selects the CNG detection tone of friendly recep-
tion.
771 T1 timer 1:35 sec
2:60 sec
1, 2 1 Sets a higher value when the response from the
other party needs more time during FAX transmis-
sion.
774 T4 timer X 100 sec 00~99 00 Use this function when delay occurs in the line and
communication.
(ex. Mobile comm) does not work well.
793 LED color change 1:Green
2:Blue
3:Red
1~3 1 --------------
815 Sensor check
See (P.92).
852 Print test pattern
See (P.92).
853 Top margin 1~5 3 ----------
854 Left margin 1~7 4 ----------
874 DTMF ON time X msec 060~200 090 ----------
875 DTMF OFF time X msec 060~200 090 ----------
880 History list
See
(P.104).
881 Journal 2 list
See
(P.151).
882 Journal 3 list
See
(P.152).
Code Function Set Value Effective
Range
Default Remarks