Value Range
• 1: Call
• 2: Phonebook
• 3: Call History
• 4: Function
• 5: Park (Used when performing Park Retrieve)
• 6: ACD
• 7: Call Center/Call Centre
• 8: My Phone
• 9: Presence
• 10: FWD/DND
• 11: Paging
• 12: Group Pickup
• 13: Basic Settings
• 14: System Settings
• 15: Advanced Settings
• 16: Application
• 17: Network Camera (For KX-HDV430)
• 18: Comm. Camera (For KX-HDV430)
Note
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
– Park: CALLPARK_NOTIFICATION_ENABLE_n
– ACD: ACD_ENABLE_n
– Call Center/Call Centre: CALL_CENTER_ENABLE_n
– My Phone: UC_ENABLE
– Presence: UC_ENABLE
– Paging: MPAGE_FUNCKEY_ENABLE
– Application: XMLAPP_ENABLE
Default Value 3
IDLE_SOFT_KEY_4 (For KX-HDV330/KX-HDV430)
Value Format INTEGER
Description Specifies the function of soft key 4 on the line display or combined
display in standby mode.
5.3.1 System Settings
200 Administrator Guide Document Version: 2017-07
To Next Page
Loading...
