Value Range
• 1: Call
• 2: Phonebook
• 3: Call History
• 4: Function
• 5: Park (Used when performing Park Retrieve)
• 6: ACD
• 7: Call Center/Call Centre
• 8: My Phone
• 9: Presence
• 10: FWD/DND
• 11: Paging
• 12: Group Pickup
• 13: Basic Settings
• 14: System Settings
• 15: Advanced Settings
• 16: Application
• 17: Network Camera (For KX-HDV430)
• 18: Comm. Camera (For KX-HDV430)
Note
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
– Park: CALLPARK_NOTIFICATION_ENABLE_n
– ACD: ACD_ENABLE_n
– Call Center/Call Centre: CALL_CENTER_ENABLE_n
– My Phone: UC_ENABLE
– Presence: UC_ENABLE
– Paging: MPAGE_FUNCKEY_ENABLE
– Application: XMLAPP_ENABLE
Default Value 4
FORWARD_INCOMING_SOFTKEY_ENABLE (For KX-HDV330/KX-HDV430)
Value Format BOOLEAN
Description Specifies whether to display the "Call Forward" soft key on the line
display or combined display when there is an incoming call and also
"Call Forward" is enabled.
Value Range
• Y: Enable displaying the soft key
• N: Disable
Default Value
Y
5.3.1 System Settings
Document Version: 2017-07 Administrator Guide 201
To Next Page
Loading...
