Value Range
• 0: Original
• 1: Off
• 2: Blind (Used when performing Blind Transfer)
• 3: Park (Used when performing Call Park)
• 4: Private Hold
• 5: Call Center/Call Centre
• 6: Phonebook
• 7: Call History
• 8: Function
• 9: Flash/Recall
• 10: Call (Video Call (For KX-HDV430) or Call)
Note
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
– Blind: BLIND_TRANSFER_ENABLE
– Park: CALLPARK_KEY_ENABLE
– Private Hold: PRIVATE_HOLD_ENABLE
Default Value 0
TALKING_SOFT_KEY_4 (For KX-HDV330/KX-HDV430)
Value Format INTEGER
Description Specifies the function of soft key 4 while on a call on the line display
or combined display.
5.3.1 System Settings
204 Administrator Guide Document Version: 2017-07
To Next Page
Loading...
