Panasonic KX-HDV230 - Page 205

Value Range
• 0: Original
• 1: Off
• 2: Blind (Used when performing Blind Transfer)
• 3: Park (Used when performing Call Park)
• 4: Private Hold
• 5: Call Center/Call Centre
• 6: Phonebook
• 7: Call History
• 8: Function
• 9: Flash/Recall
• 10: Call (Video Call (For KX-HDV430) or Call)
Note
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
– Blind: BLIND_TRANSFER_ENABLE
– Park: CALLPARK_KEY_ENABLE
– Private Hold: PRIVATE_HOLD_ENABLE
Default Value 0
DELAY_RING_TIME_n
Parameter Name Example For details about parameter names end with "_n", see
5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the length of time, in seconds, until the unit rings.
Value Range 0–30
0: Disable
Default Value 0
OFF_HOOK_MONITOR_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable the Off-hook Monitor function.
Value Range
• Y: Enable Off-hook Monitor
• N: Disable
Default Value
Y
PRIVATE_HOLD_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable "Private Hold".
5.3.1 System Settings
Document Version: 2017-07 Administrator Guide 205