Panasonic KX-HDV230 - Page 206

Value Range
• Y: Enable private hold
• N: Disable
Default Value
N
Web User Interface Reference Private Hold
CONF_OWNER_OUT_ENABLE
Value Format BOOLEAN
Description Specifies whether to allow the remaining two parties in a three-party
conference to continue the conversation if the conference originator
leaves the conference call (Unattended Conference).
Value Range
• Y: Enable Unattended Conference
• N: Disable
Default Value
N
PCAP_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable packet capturing using the
Wireshark utility (PCAP Remote).
Value Range
• Y: Enable PCAP Remote
• N: Disable
Default Value
N
PCAP_REMOTE_ID
Value Format STRING
Description Specifies the ID of the IP phone whose packets will be captured using
the Wireshark utility (PCAP Remote).
Value Range 1–16 characters
Default Value Empty string
PCAP_REMOTE_PASS
Value Format STRING
Description Specifies the password of the IP phone whose packets will be
captured using the Wireshark utility (PCAP Remote).
Value Range 0, 6–64 characters
Default Value Empty string
PCAP_REMOTE_PORT
Value Format INTEGER
Description Specifies the port of the IP phone to use for capturing packets using
the Wireshark utility (PCAP Remote).
5.3.1 System Settings
206 Administrator Guide Document Version: 2017-07