Panasonic KX-HDV230 - Page 282

Description Specifies the maximum number of servers (including the first [normal]
server) used in the fail-over process.
Value Range 1–4
Default Value 2
SIP_FOVR_MODE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether INVITE/SUBSCRIBE will also follow the
REGISTER Failover result.
Value Range
• Y: INVITE/SUBSCRIBE will follow the REGISTER Failover result.
• N: INVITE/SUBSCRIBE will not follow the REGISTER Failover
result.
Default Value
N
SIP_FOVR_DURATION_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the number of transmission times for the REGISTER
method at the Failover destination.
Value Range 0–255
Default Value 0
SIP_ADD_ROUTE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether or not to add Route headers when setting
OutBoundProxy.
Note
• Route headers are not added when OutBoundProxy and other
server settings are the same.
Value Range
• Y: Route headers are added
• N: Route headers are not added
Default Value
Y
SIP_REQURI_PORT_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to add the port parameter to the Request-Line in
the initial SIP request.
5.3.22 SIP Settings
282 Administrator Guide Document Version: 2017-07