Panasonic KX-HDV230 - Page 283

Value Range
• Y: Add the port parameter
• N: Do not add the port parameter
Note
• Request URI in REGISTER example:
– If set to "Y", the port parameter is added to the Request-
Line, as follows:
Request-Line: REGISTER sip:192.168.0.10:5060 SIP/2.0
– If set to "N", the port parameter is not added to the Request-
Line, as follows:
Request-Line: REGISTER sip:192.168.0.10 SIP/2.0
Default Value
Y
ADD_EXPIRES_HEADER_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to add an "Expires" header to REGISTER (adds an
"expires" parameter to the "Contact" header).
Value Range
• Y: Add Expires Header
• N: Do not add Expires Header
Default Value
N
ADD_TRANSPORT_UDP_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to add the attribute "transport=udp" to the SIP
header URI.
Value Range
• Y: Add Transport UDP
• N: Do not add Transport UDP
Default Value
N
SIP_ADD_DIVERSION_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies whether to add Diversion header information.
Value Range 0–2
– 0: Do not add Diversion header information
– 1: Use own diversion information only for the Diversion header
– 2: Add diversion information to existing Diversion header
Default Value 0
5.3.22 SIP Settings
Document Version: 2017-07 Administrator Guide 283