TRANSFER_RECALL_TIM
Value Format INTEGER
Description Specifies the time that the original call is resumed when the
forwarding party does not response by Refer method for call transfer.
Value Range 0, 1–240
Default Value 0
SIGNAL_COMPRESSION_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies whether to use signal compression. When using signal
compression, select Required or Supported.
Value Range
• 0: Disable
• 1: Enable (Required)
• 2: Enable (Supported)
Default Value 0
MAX_BREADTH_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the Max Breadth that is max Folk number at Proxy.
Value Range 0–99 (0: Not add max-breadth header)
Default Value 60
MUTIPART_BOUNDARY_DELIMITTER_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format STRING
Description Specifies the strings that indicates the boundary for Multipart Bodies.
Value Range Max. 70 characters
Default Value boundary1
RINGTONE_183_180_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to ring the local ringback tone when 180 is
received after receiving 183 Early media.
Value Range
• Y: Performs ringback tone after early media
• N: Does not perform
Default Value
N
5.3.22 SIP Settings
284 Administrator Guide Document Version: 2017-07
To Next Page
Loading...
