Panasonic KX-HDV230 - Page 288

Description Specifies whether to support RFC6947 draft08 when the attvalue is
not attached after altc.
Value Range
• Y: Performs ALTC by Draft08
• N: Performs ALTC by RFC6947
Default Value
Y
RFC5627_SUPPORT_GRUU_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to add "supported: gruu" to support join header.
Value Range
• Y: Adds supported: gruu
• N: Does not add
Default Value
N
ESCAPECODE_CONVERSION
Value Format BOOLEAN
Description Specifies whether to convert "#" code to "%23".
Value Range
• Y: Convert "#" code to "%23"
• N: Does not convert
Default Value
Y
SIP_REPLACE_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to use "Replaces" Header.
Value Range
• Y: Use "Replaces" Header
• N: Do not use "Replaces" Header
Default Value
Y
SIP_REFRESHER_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies whether to add the refresher parameter for Session Expire
in SIP INVITE.
Value Range 0–2
– 0: Do not add the refresher parameter
– 1: Add the refresher parameter with the value "UAS"
– 2: Add the refresher parameter with the value "UAC"
5.3.22 SIP Settings
288 Administrator Guide Document Version: 2017-07