Panasonic KX-HDV230 - Page 60

Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Parameter
*4
ü ü
page 144
Label Name
*4
ü ü
page 156
*1
The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2
This setting can also be configured through configuration file programming.
*3
This setting can also be configured through phone user interface programming.
*4
This setting can also be configured through other programming methods (phone user interface programming or configuration file
programming).
*5
The number of lines available varies depending on the phone being used.
*6
Each DSS console supports 40 keys. DSS console 1 uses keys 1-40, DSS console 2 uses keys 41-80, etc.
Maintenance
Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Provisioning
Maintenance
Provisioning
Maintenance
Standard File URL
*2
ü
page 157
Product File URL
*2
ü
page 157
Master File URL
*2
ü
page 158
Cyclic Auto Resync
*2
ü
page 158
Resync Interval
*2
ü
page 158
Time Resync
*2
ü
page 158
Header Value for Resync
Event
*2
ü
page 158
Firmware
Maintenance
Firmware Maintenance Enable Firmware Update
*2
ü
page 159
Firmware File URL
*2
ü
page 159
Firmware Version
*2
(For
KX-HDV330/KX-HDV430)
ü
page 160
Upgrade
Firmware (For
KX-HDV130/
KX-HDV230)
Upgrade Firmware Firmware File URL (For
KX-HDV130)
File Name (For KX-HDV230)
ü
page 160
Export Logging
File
Export Logging File Logging File Type
ü
page 161
Reset to Defaults Reset to Carrier
Defaults
The following settings will be
reset to carrier default values
when you click [Reset to
Carrier Defaults].
ü
page 162
4.1 Web User Interface Setting List
60 Administrator Guide Document Version: 2017-07