1.33 Cellular Phone Features
1.33.1 Cellular Phone Features—SUMMARY
Description
This PBX
provides features to support the use of cellular phones and other outside destinations with the PBX.
Calls can be forwarded from virtual PSs to outside destinations such as cellular phones, and then answered
as if the user was at an extension within the PBX.
The following features can be used with cellular phones and other outside extensions:
Feature Description & Reference
Outside Destinations in
Incoming Call Distribution
Group
Up to 4 cellular phones can be assigned as members of an
Incoming Call Distribution (ICD) Group, and receive calls to the
group.
® 1.2.2.3 Outside Destinations in Incoming Call Distribution
Group
Cellular Phone XDP Parallel
Mode
A PT user can set up to 4 cellular phones to ring in parallel for
incoming calls.
® 1.2.2.3 Outside Destinations in Incoming Call Distribution
Group
DISA Automatic Walking COS Registered cellular phones are automatically recognised as PBX
extensions when calling through DISA.
® 1.17.6 Direct Inward System Access (DISA)
DISA Call Transfer From
Outside Destination
A cellular phone user who answers a trunk call forwarded from the
PBX using DISA can transfer that call to an extension within the
PBX.
It is also possible to establish a Conference call, perform Call
Splitting, and page with a call on hold to transfer the call.
® 1.17.6 Direct Inward System Access (DISA)
Conditions
• The KX-NCS4910 (Activation Key for Software Upgrade to Enhanced Version) for the KX-TDE100/
KX-TDE200, or the KX-NCS4950
(Activation Key for Software Upgrade to Enhanced Version) for the
KX-TDE600 is required to use this feature.
Feature Guide References
1.25.6 Virtual PS
Feature Guide 393
1.33.1 Cellular Phone Features—SUMMARY
To Next Page
Loading...
