Panasonic KX-NS Series Programming Manual

1.1 Introduction
1.1.1 Introduction
These programming instructions are designed to serve as an overall system programming reference for the
Panasonic IP-PBX. Each feature in the PBX has default settings that can be changed to customize the PBX
to your requirements. These settings control the functions of the PBX, and changing them is referred to as
"system programming".
Only one person can perform system programming at a time. Any other users trying to enter system
programming mode will be denied access.
Ways to Program
There are two programming methods:
• PC (Personal Computer) Programming
All features and settings of the PBX can be programmed through PC programming with Maintenance
Console. Installing and starting Maintenance Console are explained in the Installation Manual.
• PT (Proprietary Telephone) Programming
A subset of the features and settings of the PBX can be programmed using a PT. PT programming is
described in Section
2.1 PT Programming. An extension user can perform system programming by
entering three-digit programming numbers with a PT.
8 PT Programming Manual Document Version 2014-11
1.1.1 Introduction

Panasonic KX-NS Series Specifications

General

Brand	Panasonic
Model	KX-NS Series
Category	PBX
Language	English