Why I cannot send a call waiting tone on Panasonic Telephone?
If you cannot send a call waiting tone to the dialled extension on your Panasonic Telephone, it could be because the other party has not set the Call Waiting feature. Alternatively, the other party might have set Data Line Security.
Why can't I originate an outside call, transfer a call, or start a conference on my Panasonic KX-NS1000?
If you're unable to originate an outside call, transfer a call, or start a conference on your Panasonic PBX, it's likely because the corresponding flexible button does not exist on the PT. To resolve this, program the flexible button.
How to fix parallelled single line Panasonic Telephones that do not ring?
If the parallelled single line telephones do not ring, the 'No ring' setting may be selected. Change the setting to ring.
Why can't I make outside calls on my Panasonic KX-NS1000?
If you're unable to make outside calls, transfer calls, or initiate conferences on your Panasonic PBX, the corresponding flexible button may not be programmed on the PT. Program the flexible button.
What to do if my Panasonic Telephone does not respond when buttons are pressed?
If your Panasonic Telephone is locked, it will not respond when buttons are pressed. Unlock your telephone.
What does ERR 3100-0000 BLUETOOTH ERROR mean on Panasonic KX-NS1000?
If your Panasonic PBX displays the error 'ERR 3100-0000 BLUETOOTH ERROR' and resets the Bluetooth wireless headset, it indicates a Bluetooth hardware error. Repair or replace the Bluetooth wireless headset.
What to do if my Panasonic KX-NS1000 phone does not have a feature button?
If your Panasonic PBX proprietary telephone does not have a feature button, it may be because some models do not include one. In this case, you can change a flexible button to the desired button or enter the specified feature number instead of using the feature button.
How do I fix noise on external paging with my Panasonic PBX?
To eliminate noise on external paging with your Panasonic PBX: Use a shielded cable as the connection wire between the PBX and amplifier. A short shielded cable is recommended.
What does ERR 2006-XXXX DHCP SERVER REJECTION mean on Panasonic PBX?
If your Panasonic PBX displays the error 'ERR 2006-XXXX DHCP SERVER REJECTION' and resets, it means the IP address lease time from the DHCP server has expired. Consult your network administrator to resolve this issue.
What does ERR 2002-0000 POOR LAN CONNECTION mean on Panasonic KX-NS1000 PBX?
If your Panasonic PBX displays the error 'ERR 2002-0000 POOR LAN CONNECTION' and resets, it could be due to a transmission error. Check with your network administrator to see if there's a problem with the LAN. If the error appears frequently, consider repairing or replacing the IP-PT.
General| Type | Hybrid IP-PBX |
|---|---|
| Max Concurrent Calls | 256 |
| VoIP Protocols | SIP, H.323 |
| Power Supply | AC 100-240V, 50/60Hz |
| Maximum Extensions | 1, 000 |
| IP Extensions | 1000 |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10 to 90% (non-condensing) |
| Max Users | 1000 |
To Next Page