Panasonic KX-NS1000 User Manual (English)

Other manuals for Panasonic KX-NS1000

User Guide528 pages

Feature Manual482 pages

Guide542 pages

Pc Programming Manual1294 pages

Operating Manual366 pages

Installation Manual416 pages

User Manual384 pages

Getting Started58 pages

Features Guide20 pages

Quick Reference Guide28 pages

Questions and Answers:

L
Lori KleinAug 29, 2025
Why can't I set the IP address, subnet mask address, and PBX IP address to the IP-PT on my Panasonic KX-NS1000 PBX?
- R
  ryan88Aug 29, 2025
  If you're unable to set the IP address, subnet mask address, and PBX IP address to the IP-PT on your Panasonic PBX, it's likely because you are setting an unusable value. Ensure you set an IP address within the valid range. For the IP address of the IP-PT/PBX, use a value between "1.0.0.0" and "223.255.255.255". For the subnet mask address, use a value between "0–255.0–255.0–255.0–255", excluding "0.0.0.0" and "255.255.255.255".
D
Derrick GregoryAug 29, 2025
What does it mean when the STATUS indicator on the front of my Panasonic KX-NS1000 cabinet turns on red?
- A
  Allison SchultzAug 29, 2025
  When the STATUS indicator on the front of the Panasonic PBX cabinet turns red, it indicates that a major system error has occurred in the PBX. To troubleshoot, see the error log using Web Maintenance Console.
G
Gabriel FigueroaAug 28, 2025
How to fix noise on external paging with my Panasonic PBX?
- M
  Matthew BradshawAug 28, 2025
  If you're experiencing noise on external paging with your Panasonic PBX, it's likely due to induced noise on the wire between the PBX and the amplifier. To fix this, use a shielded cable as the connection wire between the PBX and the amplifier. A short shielded cable is recommended.
A
Adam ClarkAug 28, 2025
How to fix distorted external music on my Panasonic KX-NS1000?
- J
  Jerry PhamAug 28, 2025
  If you're experiencing distorted external music on your Panasonic PBX, it's likely due to an excessive input level from the external music source. To resolve this, simply decrease the output level of the external music source using the volume control on the music source.
M
Michelle DavisAug 28, 2025
What to do if extensions (except IP-PT/ SIP phone) do not operate on my Panasonic PBX?
- B
  Brandon HallAug 28, 2025
  If extensions (excluding IP-PT/SIP phones) aren't working on your Panasonic PBX, it could be due to a few reasons. First, the extension card might be faulty, so try replacing it. Second, there could be a poor connection between the PBX and the extension. To test this, plug the extension into the same extension port using a short telephone cord; if it works, the connection between the PBX and the extension needs repair. Third, a telephone with an A-A1 relay might be connected. Make sure a 2-wire cord is used and the A-A1 relay switch is in the "OUT" or "OFF" position. Lastly, the extension itself could be malfunctioning. Plug it into another working extension port; if it still doesn't work, replace the extension.
A
amydonaldsonAug 28, 2025
What to do if the LINK indicator of the mother board does not turn on my Panasonic PBX?
- C
  Christopher MelendezAug 28, 2025
  If the LINK indicator on your Panasonic PBX motherboard isn't lighting up, it could be due to a motherboard malfunction, in which case you should replace the motherboard after turning off the PBX. Another potential cause is a poor connection. To resolve this, ensure an 8-pin twisted pair cable is used for the connection, that none of the CAT 5/CAT 5e cables in use are over 100 m in length, and that a straight cable is used for connection to a switching hub. Finally, a network malfunction could be the cause, so ensure all network devices in use are switched on.
C
Chad CoxAug 27, 2025
Why are my IP-PTs or SIP phones not operating on my Panasonic KX-NS1000 PBX?
- J
  John HancockAug 27, 2025
  If your IP-PTs or SIP phones aren't working with your Panasonic PBX, consider these potential causes: a malfunctioning DSP card (replace the card), a faulty motherboard (replace it after turning off the PBX), or not enough activation keys (purchase more from a certified dealer). Also, the IP-PT/SIP phone might not be registered (register it), or the phone itself may be faulty (replace it). Poor connection could be the issue; ensure you're using an 8-pin twisted pair cable, that CAT 5/CAT 5e cables are under 100m, and a straight cable connects to the switching hub. Lastly, a network malfunction could be the reason; ensure all network devices are on and the IP-PT/SIP phone isn't blocked by a firewall.
A
Alvin SalazarAug 27, 2025
What to do if I cannot make or receive calls via IP network on my Panasonic KX-NS1000?
- M
  Mr. Tristan StewartAug 27, 2025
  If you cannot make or receive calls via an IP network using your Panasonic PBX, the issue could stem from several causes: a malfunctioning DSP card (in which case, replace the card), a faulty motherboard (replace the motherboard, ensuring the PBX is off during replacement), or an insufficient number of activation keys (purchase additional keys from a certified dealer). Poor connection can also be the culprit; ensure an 8-pin twisted pair cable is used, CAT 5/CAT 5e cables are not over 100m, and a straight cable connects to the switching hub. Finally, a network malfunction may be to blame, so verify all network devices are on and no unwanted firewall is present.
N
Nicholas RollinsSep 4, 2025
How to fix Panasonic PBX if I cannot make an outside call using One-touch Dialing?
- J
  Jason BrownSep 4, 2025
  If you are unable to make an outside call using the One-touch Dialing button or speed dialing on your Panasonic PBX system, it's likely that a line access number was not stored. A line access number is required for outside calls.
J
Jody SmithAug 27, 2025
How to correct the date and time on Panasonic Telephone?
- C
  Cynthia SmithAug 27, 2025
  If the date and time are not correct on your Panasonic Telephone, set the date and time by system programming.

Panasonic KX-NS1000 Specifications

General

Type	Hybrid IP-PBX
Max Concurrent Calls	256
VoIP Protocols	SIP, H.323
Power Supply	AC 100-240V, 50/60Hz
Maximum Extensions	1, 000
IP Extensions	1000
Operating Temperature	0°C to 40°C
Humidity	10 to 90% (non-condensing)
Max Users	1000