Why is the MESSAGE button lit up on my Panasonic KX-NS1000 phone?
If the MESSAGE button light on your Panasonic PBX telephone is illuminated, it indicates that another extension has left a message waiting for you, or someone left a message in your mailbox while you were on the phone or away from your desk.
What does ERR 3100-0000 BLUETOOTH ERROR mean on Panasonic KX-NS1000?
If your Panasonic PBX displays the error 'ERR 3100-0000 BLUETOOTH ERROR' and resets the Bluetooth wireless headset, it indicates a Bluetooth hardware error. Repair or replace the Bluetooth wireless headset.
What does ERR 1051-0000 SOFTWARE ERROR mean on Panasonic PBX?
If your Panasonic PBX displays the error 'ERR 1051-0000 SOFTWARE ERROR' and stops operating, it indicates a PBX software version error. Consult your network administrator for assistance.
How to fix distorted external music on Panasonic KX-NS1000?
If you're experiencing distorted external music with your Panasonic PBX, it's likely due to an excessive input level from the external music source. Reduce the output level using the volume control on the music source.
How to fix noise on external paging on Panasonic KX-NS1000?
If you are experiencing noise on external paging with your Panasonic PBX, it could be due to induced noise on the wire between the PBX and the amplifier. To resolve this, use a shielded cable as the connection wire. A short shielded cable is recommended.
What does ERR 2007-0000 HARDWARE ERROR mean on Panasonic KX-NS1000 PBX?
If your Panasonic PBX displays the error 'ERR 2007-0000 HARDWARE ERROR' and resets, it indicates a communication error with the sub CPU. If this error appears frequently, consider repairing or replacing the IP-PT.
What does it mean when the STATUS indicator on the front of Panasonic PBX cabinet turns on red?
If the STATUS indicator on the front of your Panasonic PBX cabinet turns red, it indicates a major system error. To diagnose, check the error log using the Web Maintenance Console.
Why the LINK indicator of the mother board does not turn on Panasonic KX-NS1000 PBX?
If the LINK indicator on the mother board of your Panasonic PBX isn't turning on, it could be due to a few reasons. The mother board itself might be malfunctioning, in which case you should replace it, remembering to turn off the PBX first. Another potential cause is a poor connection. Ensure that you are using an 8-pin twisted pair cable for the connection, that none of your CAT 5/CAT 5e cables exceed 100 meters in length, and that you're using a straight cable for connection to a switching hub. Finally, a network malfunction might be the issue, so check that all network devices are switched on.
What does 'ERR 2001-XXXX SYSTEM ERROR' mean on my Panasonic PBX?
If your Panasonic PBX displays the error 'ERR 2001-XXXX SYSTEM ERROR', resets, and shows the error for 5 seconds during startup, it indicates an unexpected error. If this error is displayed frequently, repair or replace the IP-PT.
Why can't I originate an outside call, transfer a call, or start a conference on my Panasonic KX-NS1000?
If you're unable to originate an outside call, transfer a call, or start a conference on your Panasonic PBX, it's likely because the corresponding flexible button does not exist on the PT. To resolve this, program the flexible button.
General| Type | Hybrid IP-PBX |
|---|---|
| Max Concurrent Calls | 256 |
| VoIP Protocols | SIP, H.323 |
| Power Supply | AC 100-240V, 50/60Hz |
| Maximum Extensions | 1, 000 |
| IP Extensions | 1000 |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10 to 90% (non-condensing) |
| Max Users | 1000 |
To Next Page