To Next PageTo Next PageWhy is my Panasonic Telephone PS not working?
If your Panasonic Telephone's PS does not work, it could be because the battery is empty. In this case, charge the batteries fully. If the PS has been cancelled or not registered, you should consult your dealer.
What does "REGISTER UNIT" mean on Panasonic Telephone?
If your Panasonic Telephone displays "REGISTER UNIT", it means the PS is not registered in the system. Consult your dealer.
What to do if my Panasonic Telephone displays "PS NO CONNECTED"?
If your Panasonic Telephone displays "PS NO CONNECTED", it could be due to several reasons. First, check if the power switch is turned OFF and turn it ON. Second, the PS might be out of range, so try moving closer to the CS. Finally, the radio channel might be busy, or a radio communication error might have occurred, so try again later.
How to fix static and sound issues on Panasonic Telephone?
If you are experiencing static, sound cuts in/out, or fading on your Panasonic Telephone, or if there is interference from other electrical units, try setting the PS and CS away from other electrical appliances. Also, try moving closer to the CS.
What to do if Panasonic Telephone PS does not operate?
If the PS of your Panasonic Telephone does not operate, ensure that the power switch is turned ON.
Why does the battery icon flash on my Panasonic Telephone after charging?
If you charged the batteries fully, but the battery icon continues to flash on your Panasonic Telephone, try cleaning the charge contacts and charge again. If the issue persists, it may be time to replace the batteries with new ones.
Why does the battery icon flash during a conversation on my Panasonic Telephone?
If the battery icon flashes or beeping tones sound every 5 seconds during a conversation on your Panasonic Telephone, it indicates that the battery is low. Charge the batteries fully.
Why does the alarm sound when I press Redial on my Panasonic Telephone?
If the alarm sounds after pressing the Redial button on your Panasonic Telephone, it is because a number is not saved in the Call Log.
Why doesn't my Panasonic Telephone show a strong radio signal?
If the display on your Panasonic Telephone does not show a strong radio signal even though you are near the CS, the PS user can normally still make calls. The current linked CS is still connected even though another CS is closer.
Why does the alarm sound during a conversation with a weak signal on my Panasonic Telephone?
If the alarm sounds during a conversation while receiving a weak radio signal on your Panasonic Telephone, it means the radio signal is weak. Try moving closer to the CS.
General| Maximum CO lines | 8 |
|---|---|
| Extensions | 8 |
| Expandable Extensions | 16 |
| Maximum Extensions | 24 |
| Expandable | Yes |
| Caller ID | Yes |
| Call Forwarding | Yes |
| Call Waiting | Yes |
| DISA/OGM | Yes |
| Doorphone Interface | Yes |
| SMDR | Yes |
| Power Failure Transfer | Yes |
| Intercom | Yes |
| Music on Hold | Yes |
| Conference | Yes |
| Door Phone | Yes |
| Type | Digital |
| Lines | 3 |
| Weight | 6.6 lbs |
