P
philipfoxAug 28, 2025
What to do if Panasonic Telephone PS does not operate?
- SsmillerAug 28, 2025
If the PS of your Panasonic Telephone does not operate, ensure that the power switch is turned ON.
To Next PageTo Next PageWhat to do if Panasonic Telephone PS does not operate?
If the PS of your Panasonic Telephone does not operate, ensure that the power switch is turned ON.
Why does the battery icon flash on my Panasonic Telephone after charging?
If you charged the batteries fully, but the battery icon continues to flash on your Panasonic Telephone, try cleaning the charge contacts and charge again. If the issue persists, it may be time to replace the batteries with new ones.
Why does the battery icon flash during a conversation on my Panasonic Telephone?
If the battery icon flashes or beeping tones sound every 5 seconds during a conversation on your Panasonic Telephone, it indicates that the battery is low. Charge the batteries fully.
Why does the alarm sound when I press Redial on my Panasonic Telephone?
If the alarm sounds after pressing the Redial button on your Panasonic Telephone, it is because a number is not saved in the Call Log.
Why does my Panasonic Telephone not ring?
If your Panasonic Telephone does not ring, it might be because the ringer volume is set to OFF or VIBRATION. To resolve this, set it to ring by pressing the Volume Control button. Alternatively, the PS might be out of range, or the Cell Station (CS) could be busy, so move closer to the CS or try again later. Also, the radio channel might be busy, or a radio communication error might have occurred, so try again later.
Why does the alarm sound during a conversation with a weak signal on my Panasonic Telephone?
If the alarm sounds during a conversation while receiving a weak radio signal on your Panasonic Telephone, it means the radio signal is weak. Try moving closer to the CS.
What to do if Panasonic Telephone PS stops working?
If your Panasonic Telephone's PS stops working during operation, try turning the power switch OFF and then ON again. If that doesn't work, re-insert the battery and try again.
Why can't I save a number in my Panasonic Telephone directory?
If you cannot store a phone number and name in the directory of your Panasonic Telephone, it may be because your entry exceeds the maximum digits or characters. Also, avoid pausing for over 30 seconds while programming.
What does "FAULT" mean on Panasonic Telephone?
If your Panasonic Telephone displays "FAULT", consult your dealer.
What to do if my Panasonic Telephone System handset does not work?
If your Panasonic Telephone System handset isn't working, there could be several reasons. First, the battery might be drained, so charge it fully. If that doesn't work, check if the power is turned off and turn it on. As a last resort, try re-inserting the battery.
General| Maximum CO lines | 8 |
|---|---|
| Extensions | 8 |
| Expandable Extensions | 16 |
| Maximum Extensions | 24 |
| Expandable | Yes |
| Caller ID | Yes |
| Call Forwarding | Yes |
| Call Waiting | Yes |
| DISA/OGM | Yes |
| Doorphone Interface | Yes |
| SMDR | Yes |
| Power Failure Transfer | Yes |
| Intercom | Yes |
| Music on Hold | Yes |
| Conference | Yes |
| Door Phone | Yes |
| Type | Digital |
| Lines | 3 |
| Weight | 6.6 lbs |
