3-80 Telephone Features
L 3.2 Telephone Features
Conditions
• A flexible CO or DSS button can be assigned as the Live Call Screening (LCS) button
or the Live Call Screening (LCS) Cancel button.
• The Live Call Screening indicator shows the feature status as follows:
Red (steady). . . . . . . . . . . The Live Call Screening mode is on.
Off . . . . . . . . . . . . . . . . . The Live Call Screening mode is off.
Flashing green slowly . . . Live Call Screening is active.*
Flashing green rapidly . . . An alert tone is ringing.**
** The DSS button indicator flashes red slowly while Live Call Screening is active.
** The DSS button indicator flashes red moderately while an alert tone is ringing.
• The Two-Way Record indicator shows the feature status as follows:
On . . . . . . . . . . . . . . . . . . Recording the conversation.
Off. . . . . . . . . . . . . . . . . . Not recording.
• The operator and the manager can clear a password at any extension.
• During the Keep Recording mode, if you want to stop recording the conversation, press
the Two-Way Recording button.
• With the KX-T7030, KX-T7130 and KX-T7135, you can assign the password using the
display operation.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Live Call Screening (LCS) Button,
Live Call Screening (LCS) Cancel Button
Two-Way Record Button
Live Call Screening Mode Set
• System Programming — Installation Manual
[620] Live Call Screening Recording Mode Assignment
Feature References
Live Call Screen Password Control (3.3 Operator/Manager Service Features)
Station Programming — Live Call Screening (LCS) Button Assignment
Live Call Screening (LCS) Cancel Button Assignment
(4.2 DSS Console Features)
PT
PT
PT
PT
PT
PT
To Next Page
Loading...
