Panasonic KX-TA624 - Direct Station Selection (DSS) Button

Station Programming (Personal Programming) 2-11
2.2 Station Programming (Personal Programming)
Direct Station Selection (DSS) Button (Assignment)
Allows you to assign a Flexible button (CO, DSS, MESSAGE) as a DSS button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• DSS buttons are provided on the DSS Console with a default setting. You can change
the setting from a paired telephone.
Feature Reference
Intercom Calling
PT
Press the desired Flexible
button you wish to assign
as a DSS button.
Dial 1.
1
Press STORE.
AUTO DIAL
STORE
Enter the extension number
(100 through 199).
extension no.
• The STORE indicator lights.
• The display shows the initial
programming mode.
<PT Display Example>
EXT–
<PT Display Example>
extension number
• To erase an incorrect entry, press the TRANSFER (CLEAR)
button.
(The TRANSFER button becomes the CLEAR button during
programming.)
EXT–xxx