Panasonic KX-TA624 - Conference (CONF) Button

2-10 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature References
Conference
Conference, Unattended
PT
Press the desired Flexible CO
button you wish to assign as
the Conference button.
Dial 3.
3
Press STORE.
AUTO DIAL
STORE
CO
<PT Display Example>
Conference
• The STORE indicator lights.
• The display shows the initial programming mode.
Conference (CONF) Button (Assignment)
Allows you to assign a Flexible CO button as the Conference (CONF) button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.