Panasonic KX-TA624 - Voice Mail (VM) Transfer Button

2-22 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Voice Mail (VM) Transfer Button (Assignment)
†
Allows you to assign a Flexible button (CO, DSS) as the VM Transfer button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• You cannot enter a non-existent extension number.
• A voice mail extension number must be assigned by System Programming.
Feature Reference
Voice Mail Transfer
† Available when the KX-TA624 is connected to a Proprietary Telephone capable Panasonic Voice Processing System (one
that supports APT Integration; KX-TVS50/KX-TVS80).
PT
Press the desired Flexible button
you wish to assign as the VM
Transfer button.
Dial 94.
9 4
Press STORE.
AUTO DIAL
STORE
Enter the Voice Mail
extension number.
Voice Mail extension no.
• The STORE indicator lights.
• The display shows the initial
programming mode.
<PT Display Example>
VTR
<PT Display Example>
Voice Mail extension number
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
VTR-xxx