2-8 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Caller ID Indication Button (Assignment)
Allows you to assign a Flexible CO button as the Caller ID Indication button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible CO button you wish to
assign as the Caller ID Indication – Personal button.
Dial 6.
6
Press STORE.
AUTO DIAL
STORE
CO
–– Personal
Press the desired Flexible CO button you wish to
assign as the Caller ID Indication – Common button.
9
Press STORE.
AUTO DIAL
STORE
CO
–– Common
Dial 96.
6
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• System Programming determines who can assign the Caller ID Indication — Common
button.
Programming Reference
• System Programming — Installation Manual
[909] Common Area Call Log Check Assignment
Feature References
Call Information/Log, Incoming
Call Log, Incoming
PT
<PT Display Example>
CID-P Indication
• The STORE indicator lights.
• The display shows the initial programming mode.
<PT Display Example>
CID-C Indication
To Next Page
Loading...
