Panasonic KX-TA624 - Page 161

Telephone Features 3-101
3.2 Telephone Features P
Condition
• If “Hold-3” is assigned in System Programming, you must dial “20” after flashing the
hookswitch.
Programming References
• System Programming — Installation Manual
[104] Hold Mode Selection
[600] Extension Group Assignment
SLT
Using Paging — Group: to a particular extension group
PT and SLT
Dial tone
Confirmation tone
Confirmation tone
Announce. Wait for an answer.
3 3
Dial 33.
During a conversation
Hang up or press
SP-PHONE .
For a PT: Press TRANSFER.
For an SLT: Flash the hookswitch.
For an SLT
For a PT
TRANSFER
Enter a paging group
number (1 through 8).
paging group no.
• The other party is placed on hold.
• The held party and the paged extension are
connected and can start a conversation.