Telephone Features 3-129
3.3 Operator/Manager Service Features
The system supports one operator and one manager. Any extension can be appointed as
the operator and jack number 01 is appointed as the manager. System Programming is
required to assign the operator. The manager can program a few System Program (see
following “Manager Programming”) with their extension password. The operator and
manager can perform the following features.
1) Call Log, Incoming in the Common Area — CLEAR ALL
2) Call Log Lock, Incoming in the Common Area
3) Date and Time Setting
4) Electronic Station Lockout — CANCEL ALL
5) Live Call Screening Password Control
6) Outgoing Message (OGM)
7) Remote Station Lock Control
8) The 301st Call Log, Incoming in the Common Area Treatment
9) Time (Day/Night/Lunch) Service Setting
10) Timed Reminder, Remote (Wake-Up Call)
11) Extension Password Set (Manager only)
Programming Reference
• System Programming — Installation Manual
[008] Operator Assignment
To Next Page
Loading...
