Panasonic KX-TA624 - Page 191

Telephone Features 3-131
3.3 Operator/Manager Service Features
Conditions
• During the programming mode, your extension is treated as a busy extension.
• If you enter the wrong extension password, you will hear an alarm tone (3 beeps). Try
again.
Programming References
• System Programming — Installation Manual
[001] System Speed Dialing Entry
[512] DISA Security Codes
[530] DISA Security Codes Digit Selection
Feature Reference
Extension Password Set (Manager only) (3.3 Operator/Manager Service Features)
PT
PT
To exit the programming mode
PT
Set to “SET” on the
back of the telephone.
Programming is completed
and the normal call operation
resumes.
SET PROGRAM
MEMORY
When the display shows the initial programming mode