Panasonic KX-TA624 - Page 32

2-4 Station Programming (Personal Programming)
2.1 Station Programming Instructions
To confirm the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
— The following outline contains the buttons and program access numbers used for Station
Programming. Detailed operating instructions are explained in this section.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
— If you wish to change the data, follow the programming procedure explained in this
section.
To clear the data on the Flexible button
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press HOLD.
Press the desired Flexible button.
HOLD
• The display shows the initial programming mode.• The display shows the current status.
PT
Press the desired
Flexible button that
you wish to clear.
Dial 2.
2
Press STORE.
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial programming mode.