1.3 Telephone Features and Operation
48 Operating Manual
To disconnect one party and then talk to the other in a three-party conversation
Leaving Three-party Conference
The person who originated a conference with two other parties can leave the conference, and allow the
other parties to continue the conversation.
To leave a conference involving at least one other extension
• * In this case, the FLASH/RECALL button on a proprietary telephone must be in Flash/Recall
mode. For information about setting the mode of your FLASH/RECALL button, refer to the
Feature Manual.
• During a three-party conversation, pressing the TRANSFER button or Recall/hookswitch
alternates between the two other parties in the conversation.
• You can have a conference with a maximum of eight parties (comprising intercom or CO lines)
simultaneously.
• During a conversation involving four or more parties, you cannot disconnect one party and
maintain the conversation with the other parties.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Conference button.
PT/PS
Press
TRANSFER
once
or twice to establish a
conversation with the
party to be disconnected.
During a conversation
Press
FLASH/RECALL
.* Press the flashing
CO
or
INTERCOM
corresponding
to the party on hold.
Talk.
The other party will be put on hold.
FLASH/RECALL
(CO)
OR
During a three-party conference
PT/SLT/PS
On-hook.
To Next Page
Loading...
