Panasonic KX-TDA100 - Page 333

1.19 V
Feature Manual 333
• It is possible to select whether the mailbox number is the same as the extension number, or the mailbox
number is programmable for each extension number and incoming call distribution group (Mailbox
Access ID).
→ 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—Programmed
Mailbox No.
→ 2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Programmed Mailbox No.
→ 2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Programmed Mailbox No.
• The Inter-digit time for the DTMF command and for DTMF status signal is programmable.
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
→ Timing—Inter-digit Time
→ Timing—Waiting Time before Sending VM DTMF Status Signal
• Data Line Security is set automatically on the extensions in the VM (DTMF) group to achieve proper
recording. (→ 1.4.1 Data Line Security)
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Miscellaneous—Voice Mail (Caller from VM to CO)—On-hook Wait Time
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—Programmed Mailbox
No.
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Programmed Mailbox No.
2.10.5 [4-1-4] Wired Extension—Flexible Button
→ Ty p e
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Programmed Mailbox No.
2.10.13 [4-2-3] Portable Station—Flexible Button
→ Ty p e
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
2.10.17 [4-3] DSS Console—Flexible Button
→ Ty p e
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
PT Programming Manual
None
Feature Manual References
1.3.8 Call Transfer
1.6.3 Flexible Buttons
1.6.6 FWD (Call Forwarding)
1.9.11 Intercept Routing
1.19.3 Voice Mail (VM) Group
Operating Manual References
1.3.70 Voice Mail Features—Voice Mail Integration