PC Programming Manual References
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—
VIP Call Mode
9.1.9 Idle Extension Hunting
Description
If a called extension is busy or in DND mode, Idle Extension Hunting redirects the incoming call to an idle
member of the same idle extension hunting group, which can be programmed through system programming.
Idle extensions are automatically searched according to a preprogrammed hunting type.
This feature is also known as Station Hunting.
Type Description
Circular Hunting An idle extension is searched for in the order specified in the idle
extension hunting group in a circular way.
Extn.
Incoming call
Busy
Extn.
Extn. Extn.
Assignment order
Terminated Hunting An idle extension is searched for in the order specified in the idle
extension hunting group until reaching the last assigned extension.
Extn.
Incoming call
Busy
Extn.
Extn. Extn.
Last
Assignment order
Conditions
• Idle Extension Hunting applies to:
Intercom, CO line, and doorphone calls to a single destination.
• An extension user can belong to only one idle extension hunting group.
• If all the searched extensions are busy:
The PBX redirects
the call to an overflow destination which can be assigned for each idle extension hunting
group and each time mode (day/lunch/break/night) (® 17.1.5 Time Service).
[Available Destination]
Destination Availability
Wired Extension (PT/SLT/SIP Extension/T1-OPX)
ü
PS
ü
ICD Group
ü
PS Ring Group
ü
156 Feature Manual Document Version 2009-12
9.1.9 Idle Extension Hunting
To Next Page
Loading...
