12.1.4 One-touch Dialing
Description
A proprietary telephone (PT) user can make a call or access a feature with a one-touch operation. This is
possible by storing the number, such as an extension number, telephone number, or feature number in a
One-touch Dialing button.
Conditions
• One-touch Dialing Button
Any flexible button can be customized as a One-touch Dialing button.
• Full One-touch Dialing
There is no need to go off-hook before pressing a One-touch Dialing button.
PC Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings
—Option 6—
Flexible Button Programming Mode
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Dial (for One-touch)
6.10 [4-2-1] Portable Station—Extension Settings—Option 6— Flexible Button Programming Mode
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Dial (for One-touch)
6.17 [4-3] DSS Console
→ Type
→ Dial (for One-touch)
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.46 One-touch Dialing
12.1.5 Operator Features
Description
Any extension or Incoming Call Distribution (ICD) group can be designated as an operator.
This PBX supports the following types of operators:
Type Description
PBX operator An extension or ICD group can be assigned as a PBX operator for each
time mode (day/lunch/break/night).
198 Feature Manual Document Version 2009-12
12.1.5 Operator Features
To Next Page
Loading...
